Troubleshooting

Problem	Reason	Correction
Device does not switch on.	No power	Charge batlogger
Device does not switch on.	Device in hibernation	Connect power source through USB-C
Does not switch on even after a power source was connected	Device crashed	Reset using paper-clip (see below)
Device displays “no microphone”	No microphone attached	Attach microphone

Reset the BATLOGGER after a crash

Errors happen. We try to make our products as good as possible, but sometimes stuff crashes. We hope you never have to use this function, but just in case, here is how it works.

1. Remove the microphone

2. Bend a paper-clip or use a SIM tool from your Smartphone.

3. put the paper-clip into the whole behind the microphone.